corner radius

Corner radius for preventing the chipping in high speed machining.

刀尖圆弧可避免高速加工时刀尖损坏.

Influences of Corner Radius On Machining Accuracy of Numerically-controlled Lathe

刀尖圆弧半径对数控车床加工精度的研究

Double corner curb. Corner radius can be specified.

双拐角路缘. 可指定拐角的半径.

4-corner intersection curb. Corner radius can be specified.

四角十字路口路缘。可指定拐角的半径。

The numerical simulation results show that when the round corner radius, the deviation angle and the roughness are 1 μ m, 1 ° and 40 nm, the corresponding loss is 1.7 dB, 0.7 dB and 1 dB respectively.

当圆角半径、槽面倾斜角和粗糙度分别为1μm、1°和40nm时，相应产生的损耗为1.7dB、0.7dB和1dB。

A bigger corner radius and smaller friction were helpful to improve the strain homogeneity inside the processed sample.

增大模具过渡圆角半径及减小摩擦系数均能有效地改善试样内部等效应变分布的均匀性。

Offect of Corner Radius of Lathe Tool in NC Turning Chinese Corner

数控车削中的刀尖半径补偿

When manufacturing the part surfaces of cone or arc by CNC lathe, it causes more or less cutting because of the existence of the corner radius of lathe tool.

在数控车削加工含有圆锥或圆弧面的零件时，刀尖圆弧会造成零件过切或少切现象。

The friction behaviors in the flanges area and die corner radius area during the variable forming speed/ forming loading stamping process are studied by flat plate friction test and stretch bending friction test.

为此，针对拉深成形，分别采用平板滑动摩擦实验和拉弯摩擦实验，研究了变速/变载条件下板料在法兰处和凹模圆角处的摩擦行为。

Application of Tool Corner Radius Compensation in NC Turning

刀尖圆弧半径补偿在数控车削中的应用

By optimizing the radius of rounded corner at the root of thread and the structure of screw nut, and by changing the diameter of the root of thread, the concentrated stress was reduced, and stress distribution was improved for higher fatigue strength of the screw bolt.

通过优化螺栓螺纹根部圆角半径和螺母结构、改变螺纹根部直径的方法，缓解螺纹根部的应力集中，改善应力分布，实现提高螺栓疲劳强度的目的。

Rounded-entry driveway. Corner radius can be specified.

入口为圆角的车道。可指定拐角的半径。

The effect of different thickness is the largest, followed by the corner radius, forming speed and number is smaller effect.

其中不同厚度的影响最大，其次为弯角半径，成形速度和道次数的影响较小。

In this paper, the geometric model which was used to consider corner radius, feed per tooth, cutting speed, number of teeth and difference of height of tool nose was, developed.

从几何上考虑了刀尖圆弧半径、每齿进给量、切削速度、铣刀刀齿数、刀片刀尖高度差等因素对表面形成的影响，并建立了其几何模型的数学公式。

In this paper, the revisory formula of static carrying capacity of RHS T connection is suggested with the corner radius of chord taken into account.

为此将考虑弦杆截面圆角效应，并提出关于T型方管节点静力承载力的修正公式。

By setting supplemental allowance at arc wall to increase the round corner radius of inner flange of the open hole, the casting crack was completely eliminated.

有针对性地设置圆弧壁补贴，加大敞开口内法兰边的圆角尺寸，完全消除了铸件裂纹。

Based on the model, the relations between the pre-bulged pressure and central deflections and the effects of the corner radius and preformed pressure on the bursting properties were studied.

基于此模型，系统研究了普通正拱形爆破片预拱成形压力与拱高之间的关系，及根部圆角和成型压力对爆破性能影响。

With the feed rate and cutting depth increases, surface roughness increases. The surface roughness first increases then decreases along with the increasing of corner radius.

表面粗糙度正交试验的结果表明：表面粗糙度随着切削速度的增大而减小，随着进给量和背吃刀量的增大而增大，随着刀尖圆弧半径的增大出现先减小后增大。

This paper is mainly on how to remove inaccuracy by compensating the corner radius.

主要讨论怎样用刀尖圆弧半径补偿功能来消除误差。

The influence of the corner radius on the impact resistance of diamond film coated tools is studied through the interrupted turning test. It is proposed that properly increasing the corner radius can effectively improve the impact resistance of diamond film coated tools.

通过断续车削试验研究了刀尖圆弧半径对金刚石薄膜涂层刀具耐冲击性的影响，指出适当增大刀尖圆弧半径可有效提高金刚石薄膜涂层刀具的耐冲击性。

Influence of Corner Radius on Impact Resistance of Diamond Film Coated Tools

刀尖圆弧半径对金刚石薄膜涂层刀具耐冲击性的影响

The results indicate that the cutting corner radius is lesser, the tool is sharper, but it wears out quickly and makes the cutting force increases.

结果表明，刀刃钝圆半径越小，刀尖越锋利，但是磨损较快，切削力很快增加。

It is found that the flanging height is increasing with the increase of thickness and the corner radius.

发现随着厚度和弯曲圆角半径的增加，翻边高度增大。

Influence of Cutting Corner Radius on the Metal Cutting Process

硬质合金可转位刀片刀尖圆弧半径对切削过程的影响

An optimum combination of forming parameters of expanding-ratio, diameter of sectorial die and corner radius of die rim is concluded from a functional relation between roundness error of cross-section and forming parameters for the process of mechanical expanding of large diameter line pipe in the paper.

针对大直径管线钢管机械扩径工艺，得到了以最终制品形状精度（横断面圆度误差）为优化目标的扩径率、模具直径和模具边缘圆角半径等成形参数的最优组合。

The Influence of Cutting Corner Radius on the Cutting Process of Numerical Analysis

数控车削刀具圆弧半径对切削过程影响的数值分析

The effect of the corner radius on root stress of involute gear

刀尖圆弧半径对渐开线齿轮齿根应力的影响